Відео

THERE IS AN EASING WAY TO WIRE UP AN EXTERNAL RELAY TO BYPASS THIS

Ooops! 90 Degrees off.

Thanks for posting, very interesting. Regards from England.

Hello awesome video great info! I have the same amp when i apply 12v to the amp the power light comes on very dim an flickers on/off very rapid. Any ideas here? I checked all the mofs an cant seem to find any issue there

Not sure if u will see this, but my low ohm light is also on, is this the common fix for this?

Can you replace the original usb port with usb c?

Would you be able to build me a flat ribbon extension for that screen? I am trying to mount the screen in a different location than the head unit.

Want another one? I can't get the charging port fixed, I need a microscope.

I have a XAV-AX7000 doing the same thing. Do you do repairs for people?

Very complivated jbl made it on purpose so i could buy new chip

Good Job 👍👍👍

Thank you for the video, this made the repair a breeze. Worked perfect.

Omg, im sold.

this is very informative, thank you

ua-cam.com/video/Jfqu184qWtI/v-deo.html

Appreciate the vid. Saved me time. I tossed it in the trash and ordered a newer model. Time is money.

Great presentation. Thank you!

clean work. good job.

great job in diagnosing and narrowing down the culprit. Subscribed.

Thanks for sharing this video on how you fixed this radio. Any advice on how to learn how to solder? Thank you

can we found one original game boy screen the original only ?? ty and great video you help me with this

When I replaced the capacitor, I left the leads long so that it would be away from the resistor. I used pieces of tubing to isolate and insulate the leads. Striped wiring insulation will work fine.

I fixed the no display by replacing C920. While you are at it, change C921 as well.

Does anyone know what the voltage should be on the filament leads of the vacuum fluorescent display?

Any idea if the boot hdd can be removed and replaced ?

Very useful. Thank you.

I just picked up the same amp, but has issues and needs repaired. Any chance i could send this to be fixed?

So...I did some things off camera...and there you go. Please like and subsribe.

I need help on my Nintendo the same like that. It won't work and my parents won't help me.

How do I get the display to be brighter?

Does anyone know any place in the Phoenix area where I can have this same fix?

Hello Ben. Sos from a British lady here, essay warning. I have a Sony XAV ax 5550d stereo, looks very similar to the stereo in your repair. My fault is different, it has a dab radio built in. Bought the stereo second hand, with a magnetic aerial, swapped that for a windscreen stick on aerial BUT the plug was faulty and snapped the dab aerial port on my xav. 🥺 So now I only have fm radio, which in the uk is rubbish. Do you remember having your xav open when you made this video? Any idea what parts I need to repair this, or how to repair it please? Sony want £200 to fix it, which is madness. This is an sos, because no one else seems to have any photos or videos of the inside of my headunit. Im not a repair novice, and have a soldering iron, loads of screwdrivers and sockets etc, but no actual understanding of what part does what inside a stereo. Hence im trying to contact a competent person, such as yourself, before I remove the stereo to attempt a repair. (The removal in itself is a pain in the butt as its a modified retrofit, aka i MADE it fit using a hacksaw on my car's centre console area. Its a double din Sony, and my Mini was designed for single din only, but the XAVs are double din front, but almost single at the back. Its a known mod to my model of Mini, so I had others advice and mistakes to learn from/avoid, and a good idea of how to make it work. It was all going so well until I decided two aerials on my roof looked silly. 😢 All the scruffy bits are neatly tucked away in the void behind the glove box, and the cut bits are under solid original plastic trim, so are as safe as it was before i removed the original tape deck stereo to modernise)

I have a AX5000 and the yellow video RCA for the backup camera doesn’t work. I thought it was the camera but I troubleshooted with 2 other camera, wiring, etc. It has to be the yellow rca port. I tried cleaning it and nothing. Do you have any idea if this is board related?

i just got this in my car but why does my audio sound worse than before. I made sure that I paid for a good one so my audio wouldn't get screwed up and it sounds like water is in my speakers now

Very cool and technical, clean and very well done.

Do you know if the flex cable from the screen to the motherboard can be extended, for remote mounting of the screen?

Did you put glue on this part? 29:09

that helped me a little bit for my upgrade, thx

Very informative! The linked part looks different from your video.

Muje iska belt chahiye mil jayega??

I have a rd jl 1500/1. When powered on with no ohm load the clip light blinks saying too low ohm also it makes a slight clicking sound out of the speaker terminals any help buddy?

Me puede ayudar con el número del transistor que esta a un costado del conector rojo del board

Fabuloso video...gracias

You are a brave man to just connect speakers without checking for DC across the speakers.

i was just following the video and It was really going well until the last screw suddenly become stripped. Please help. It was so small and i can't seem to find any tutorial on how to remove stripped screw that this small. it was not "+" anymore it is "o"

Hey what type of solder wire is best to use for me to use to repair this in my truck.

Hello, where can I get the motherboard schematic? Sony XAV-AV8100

Well, the screen and digitizer set I had didn't include replacement double sided tape for the outer touch screen to attach to the case. In the video I can see it come off with the old outer touch screen, but you didn't put anything in place of the old tape to hold the touch screen in place to the outer case. I was able to take the tape off of the old screen and put it on the case for the new one. Next, the rectangular black sticky sponge that goes on the inside was literally an inch longer all the way around. I tried to take it off the old LCD, but it was just crumbling into pieces, so I had to cut the new one down with a razor knife and piece it together. After that everything went great, until I tested it and the ZR button wasn't working. I took it apart and noticed the ribbon from the LCD to the right side PCB wasn't in all the way as I had trouble getting it to fit into the slot in the PCB, so I thought maybe it just isn't in far enough. I pressed it in just a bit more, and then the ribbon kinked and broke the wires inside the ribbon cable, which I couldn't even see until I used a jewelers eyeglass to examine it. Then I realized, when you flip it over the ZR button is on the LEFT side. I looked at the button and saw that the rubber disc was slightly to the left, which was the problem all along, and I broke the ribbon cable for no reason! I just ordered a new LCD so hopefully it will work this time.

My fear is that I'll have trouble determining which size screws go back into which holes....I'm still trying to figure out a system to keep track of where they came from and where they go back in

Excellent job and I learned a LOT on soldering. I have to do this on a 2005 Expedition. One thing that I am sure you know by now is that terminal was put back in the wrong direction from original ;)